InsaneTrain Forums
Flumper.... - Printable Version

+- InsaneTrain Forums (https://insanetrain.com)
+-- Forum: General (https://insanetrain.com/forumdisplay.php?fid=4)
+--- Forum: General Forum (https://insanetrain.com/forumdisplay.php?fid=8)
+--- Thread: Flumper.... (/showthread.php?tid=31138)



Flumper.... - Bill - 10-12-2005

Need some advice....

I have an expensive pool table in my basement and it gets alittle moist down there from time to time (ie after heavy snow/rain) we're not talking standing water though....I wanna put it up off of the concrete floor with some 6x6 wood blocks, something that I'll put a nice edge on....any ideas on wood....I know cedar and redwood have good moisture resistance but I'm looking for something a little "harder"....ironwood? honduras mahogany? any suggestions/recomendations?


Flumper.... - smokeabowl - 10-12-2005

my penis gets exceptionally hard after smoking a fresh bowl of KBs. would you like my help?


Flumper.... - Anhil8tor - 10-12-2005

flumper..

I started this thread the other day

http://www.insanetrain.com/forums/showthread.php?t=31229&highlight=flumper


Flumper.... - Bill - 10-12-2005

smokeabowl Wrote:my penis gets exceptionally hard after smoking a fresh bowl of KBs. would you like my help?

sure, I'll be glad to pin your penis under the leg of a 1200lb pool table.


Flumper.... - Flumper Barflusterbutt - 10-12-2005

Bill Wrote:Need some advice....

I have an expensive pool table in my basement and it gets alittle moist down there from time to time (ie after heavy snow/rain) we're not talking standing water though....I wanna put it up off of the concrete floor with some 6x6 wood blocks, something that I'll put a nice edge on....any ideas on wood....I know cedar and redwood have good moisture resistance but I'm looking for something a little "harder"....ironwood? honduras mahogany? any suggestions/recomendations?
I'm not sure I know exactly what you are asking. If you put a 6x6 piece of redwood to act as a moisture barrier, you could put a piece of ceramic tile on top of it to give a hard surface for the pool table to rest on. If that's what you are asking.


Flumper.... - Bill - 10-12-2005

Flumper Barflusterbutt Wrote:I'm not sure I know exactly what you are asking. If you put a 6x6 piece of redwood to act as a moisture barrier, you could put a piece of ceramic tile on top of it to give a hard surface for the pool table to rest on. If that's what you are asking.

kinda.....I know redwood doesn't expand or contract with moisture...maybe I'll get some 8x8 pieces of redwood and recess a 4x4 tile into the middle of it....just wanna get the table up off of the concrete floor.


Flumper.... - Flumper Barflusterbutt - 10-12-2005

Bill Wrote:kinda.....I know redwood doesn't expand or contract with moisture...maybe I'll get some 8x8 pieces of redwood and recess a 4x4 tile into the middle of it....just wanna get the table up off of the concrete floor.
You can't hang it?


Flumper.... - Bill - 10-12-2005

Flumper Barflusterbutt Wrote:You can't hang it?

hang the whole pool table?...interesting idea....it'll require alot of steel though.....some threaded rods....na.


Flumper.... - Flumper Barflusterbutt - 10-12-2005

Bill Wrote:hang the whole pool table?...interesting idea....it'll require alot of steel though.....some threaded rods....na.
So, is it assembled or is it in pieces?


Flumper.... - Bill - 10-12-2005

Flumper Barflusterbutt Wrote:So, is it assembled or is it in pieces?

it's been together for about 3 years now.....I was just doing some touch-up paint work the other night on the floor and noticed that one of the legs is expanding a little at the glue joint....I've got the whole basement on a dehumidifier so the only thing I can contribute it to is the face that it's sitting on a concrete floor that was poured in 1958.....there's probly no foundation drain under the slab...my best guess is moisture....


Flumper.... - Flumper Barflusterbutt - 10-12-2005

Bill Wrote:it's been together for about 3 years now.....I was just doing some touch-up paint work the other night on the floor and noticed that one of the legs is expanding a little at the glue joint....I've got the whole basement on a dehumidifier so the only thing I can contribute it to is the face that it's sitting on a concrete floor that was poured in 1958.....there's probly no foundation drain under the slab...my best guess is moisture....
Ah. Well, there is no really good way of doing it then. But, you do need to separate it from the floor with something that will not absorb the moisture. Even if you get a piece of redwood, I would treat it with a moisture sealer.


Flumper.... - Bill - 10-12-2005

Flumper Barflusterbutt Wrote:Ah. Well, there is no really good way of doing it then. But, you do need to separate it from the floor with something that will not absorb the moisture. Even if you get a piece of redwood, I would treat it with a moisture sealer.

oh, whatever I put under it will be dipped in polyurathane.