I had my First run of inspections... - Printable Version

+- InsaneTrain Forums (https://insanetrain.com)
+-- Forum: General (https://insanetrain.com/forumdisplay.php?fid=4)
+--- Forum: General Forum (https://insanetrain.com/forumdisplay.php?fid=8)
+--- Thread: I had my First run of inspections... (/showthread.php?tid=29988)

---

I had my First run of inspections... - Bill - 09-12-2005

last friday, for the addition....anybody wanna guess if I passed or failed?

Here's the run down.

Framing - done by contractor
Plumbing rough in - did it myself
Electrical rough in - did it myself
HVAC rough in - did it myself

Maybe V-bookie?

---

I had my First run of inspections... - Michman - 09-12-2005

I'm guessing the re-inspection will be next week? Obviously for the part done by the contractor.

---

I had my First run of inspections... - ntype - 09-12-2005

Michman Wrote:I'm guessing the re-inspection will be next week? Obviously for the part done by the contractor.

I bet the problems started when the inspectors saw water in the tv and a sports channel in the washmachine.

---

I had my First run of inspections... - Bill - 09-12-2005

Michman Wrote:I'm guessing the re-inspection will be next week? Obviously for the part done by the contractor.

I only passed my plumbing......:$

The framing didn't pass either...I failed the HVAC because I needed a hydrolic test on the copper pipes, not an air test. Elec didn't pass because I need a light in th crawl space. but I'm free to insulate....inspector will be back out on wedensday to reinspect and inspect the insulation.

---

I had my First run of inspections... - Michman - 09-12-2005

Bill Wrote:I only passed my plumbing......:$

The framing didn't pass either...I failed the HVAC because I needed a hydrolic test on the copper pipes, not an air test. Elec didn't pass because I need a light in th crawl space. but I'm free to insulate....inspector will be back out on wedensday to reinspect and inspect the insulation.

damn and here I was gunna ask for some help on my garage. why didnt the framing pass, incorrect spacing or not enough bracing?

---

I had my First run of inspections... - Bill - 09-12-2005

Michman Wrote:damn and here I was gunna ask for some help on my garage. why didnt the framing pass, incorrect spacing or not enough bracing?

needed some fire blocking where we had to pack out a 2x6 wall to match the old block walls of the existing house.

---